SupplyControl™
SupplyControl combines your performance intelligence with real-time bidstream signals to decide which impressions reach your DSP, through which exchange and deal, and at what floor, before the DSP makes its own bidding decision.
Learn the SWYM system, find the right asset in seconds, and send clients a polished link instead of a messy attachment.
Search lessons... try "CTV" or "SmartBid"SupplyControl combines your performance intelligence with real-time bidstream signals to decide which impressions reach your DSP, through which exchange and deal, and at what floor, before the DSP makes its own bidding decision.
How the Lab works
Pick any of the 14 lessons, from SupplyControl to DeepDive. Not sure where to start? Getting Started is the shallow end.
Browse lessons →Every lesson has a 2-minute Short, the plain-English explanation, case studies, one-pagers and decks, all in one place.
Open SupplyControl™ →Hit Share with client to send a clean link with only client-ready content. No attachments, no password.
Try sharing CTV →From your first campaign to full control.
Control supply. Optimize bids. Automate execution.
Smarter decisions, made before the bid.
SPO cleans up the routes. SWYM decides what travels through them.
How intelligent, pre-bid supply decisioning works.
Fewer duplicate paths, smarter economics, stronger CTV performance.
Brand safety, quality and suitability, before the bid.
Activate your audiences before the bid.
Intelligent, real-time bid optimization.
Select suitable YouTube content, then keep improving what runs.
Campaign results become smarter decisions, every cycle.
Smart tests, clear readouts, confident scaling.
Automated governance and AI-assisted campaign operations.
One place for all your data, explored in seconds.
Home / Lessons
Every lesson holds its explanation, Shorts, case studies, the lesson PDF and decks.
Every engagement starts with SupplyControl. SWYM works through deal IDs in the DSP you already use, so there is nothing new to learn. Start with a clear goal, run a smart test, then learn and scale.
Every SWYM engagement starts with SupplyControl, which decides which impressions are worth sending to your DSP. DemandControl and sell-side audiences enhance it, YouTube extends it into walled gardens, SmartOps automates it, and DeepDive shows the results, all connected by one AI learning loop.
For most of programmatic's history, the DSP made every decision, but only about the requests it had capacity to process. Sell-side decisioning moves the first decision upstream: which impressions are worth sending to your DSP, through which path, with which signals attached. SWYM makes that decision across 11 SSPs using your campaign outcomes.
Supply-path optimization helps you choose transparent, efficient exchanges and seller routes. But even the best path carries a mix of high- and low-value impressions. SupplyControl adds outcome-informed decisioning upstream of your DSP. SPO chooses the stores; SWYM chooses the products worth buying.
SupplyControl combines your performance intelligence with real-time bidstream signals to decide which impressions reach your DSP, through which exchange and deal, and at what floor, before the DSP makes its own bidding decision. It works across 11 SSPs and growing, with any major DSP.
CTV inventory is often offered through several exchanges and deals at once, creating multiple routes to the same ad opportunity. SPO can simplify those routes. SupplyControl adds outcome-informed, pre-bid decisioning to decide which CTV opportunities and paths deserve your DSP's attention in the first place.
SupplyControl already filters fraud, made-for-advertising and unsuitable inventory before the bid. SWYM pH (Page Health) adds a 0-100 health score for every page, built from 90+ signals, so SWYM's models can avoid the wrong pages and learn which healthy ones drive your KPIs. Planned availability: Q4 2026.
SWYM combines your audience segments, campaign outcomes and real-time supply signals to decide which impressions are worth sending to your DSP. Audience matching happens on the sell side, before your DSP makes its bidding decision, and includes audience extension.
SupplyControl connects your campaign outcomes with supply-side signals. Its models learn which combinations of inventory, auction conditions and supply paths go with stronger results, and use that learning to prioritize or reduce opportunities before they reach your DSP. As new results arrive, the decisions adapt.
Every SWYM result should be proven with a smart, logical comparison, not assumed. Agree on the KPI and guardrails up front, measure SWYM supply against a baseline or control, allow a real learning period, then read out what changed: performance, efficiency and supply quality.
SmartOps is SWYM's automation layer. It continuously scans live campaigns for setup errors, pacing problems and configuration drift against rules you define, and connects the AI assistants your teams already use to live campaign data. SWYM doesn't set up your campaigns; it makes sure the ones you set up stay healthy.
Programmatic truth is scattered across DSP logs, SSP bidstreams, ad servers, verification vendors and your own CRM. DeepDive joins every feed into one governed model, so your team, your clients and your agents all read the same numbers, and answers that used to take days arrive in seconds.
Home / FAQ
Type the question in their words. The Lab finds answered questions that mean the same thing, even when they're worded differently, so you can reply with confidence.
Who SWYM is and what we solve. The questions that open almost every first meeting: lead with the problem, then the platform.
6 questions
A1How do I explain SWYM in 10 seconds, 30 seconds or 2 minutes?
Say it to your client“SWYM is an AI-native platform that controls your programmatic supply, so you only bid on the impressions most likely to drive your KPIs.”
The detail
Length
Use it for
What to say
10 seconds
Intros, email, LinkedIn
SWYM is an AI-native platform that controls your programmatic supply, so you only bid on the impressions most likely to drive your KPIs.
30 seconds
First meetings
SWYM.ai is an AI-native media decisioning platform that optimizes programmatic media before the bid. Using your campaign outcomes and real-time bidstream signals, SupplyControl™ scores, filters and prioritizes inventory across 11 SSPs and growing, removes duplicate and low-value impressions, and delivers qualified supply to the DSP you already use.
2 minutes
Technical buyers
SWYM sits between the buy side and the sell side. Instead of optimizing after money is spent, it evaluates impressions before a bid is placed, using outcome, quality, auction and supply-path signals. SupplyControl decides what reaches your DSP; DemandControl™ and SmartBid set the right bid inside your DSP; SmartOps™ keeps execution clean; DeepDive™ shows every result in one place. One AI learning loop connects them all.
Go deeperThe PlatformWatch the Short: What is Supply Shaping? Moving Decisions…Lesson #1 · SupplyControl
A2What is SWYM, in one sentence?
Say it to your client“SWYM.ai is an AI-native decisioning platform that shapes programmatic supply before the bid, so advertisers stop wasting money on impressions that will never hit their KPIs.”
The detail
The name stands for Stop Wasting Your Money. Our tagline is "Control supply. Optimize bids. Automate execution."The platform covers CTV and the open web (OLV, display, native, DOOH), with walled gardens through Curation & Optimization for YouTube and audio coming soon.Go deeperThe PlatformWatch the Short: What is Supply Shaping? Moving Decisions…Lesson #1 · SupplyControl
A3Who is SWYM built for?
Say it to your client“Agencies and in-house brand teams with meaningful programmatic spend who want better KPIs without changing DSPs.”
The detail
Go deeperGetting StartedWatch the Short: Your DSP Isn’t Broken. Your Supply Is.
A4What problem does SWYM actually solve?
Say it to your client“Advertisers can only bid on what they are shown, and most of what they are shown are "lemons" that miss their KPIs. SWYM changes what is for sale.”
The detail
We call it the Programmatic Supply Paradox. Every dollar must be spent, the shelves are mostly lemons, so lemons get bought, and the system restocks more lemons.Two blind spots cause it: SSPs get no real-time signal on what performs, and DSPs can only evaluate a fraction of available supply because of QPS throttling and duplication (industry estimates put DSP visibility at roughly 25-40% of what SSPs see).The line that lands“SPO helps you choose the right store. But who is choosing what is on the shelves?”
Go deeperLesson #14 · The Programmatic Supply ParadoxComing soonWatch the Short: You’re Optimizing Bids on Impressions Th…Lesson #13 · Why Sell-Side
A5Where should every engagement start?
Say it to your client“With SupplyControl. It is the foundation every other SWYM product builds on.”
The detail
Then follow the pathway: Prove with a smart test, Scale across campaigns and brands, Control by making it how you buy, then add the next layer. Gains stack:Layer
Estimated impact
SupplyControl™
16-25%+ estimated impact
Add DemandControl™
9-17%+ additional impact
Full stack
25-42%+ incremental upside
Based on historical SWYM client aggregated and anonymized results and benchmarks.
Go deeperThe PlatformWatch the Short: What is Supply Shaping? Moving Decisions…Getting Started
A6Who is behind SWYM, and why should we trust them?
Say it to your client“A team that has built DSPs, SSPs and ad verification technology and run programmatic inside agencies, now recognized as one of the industry's leading AI innovators.”
The detail
Go deeperswym.ai/aboutAwards & recognition
Sell-side decisioning, simply. Keep it simple: SWYM decides what is worth bidding on, your DSP decides how to bid.
11 questions
B1How does SupplyControl work?
Say it to your client“It combines your campaign outcomes with real-time bidstream signals to decide which impressions reach your DSP, through which exchange and deal, and at what floor, before your DSP bids.”
The detail
Six stages run continuously for the life of the campaign:Go deeperLesson #1 · SupplyControlWatch the Short: Balancing Efficiency & Quality in Progra…Lesson #6 · SWYM AI
B2Does SWYM replace our DSP or its bidding algorithm?
Say it to your client“No. Your DSP stays in charge of targeting, budget, pacing, bid/no-bid and price. SWYM improves the inputs, not the bidder.”
The detail
SWYM is DSP agnostic: DV360, The Trade Desk, Amazon DSP and any other major DSP. Deals activate as standard PMPs in the seats the client already uses, so there is nothing new to learn.Behind the scenes, each SWYM deal is an intelligent, dynamic deal: as results arrive, SWYM keeps updating which impressions, supply paths and floors qualify, without anyone touching the deal. Better supply plus DSP optimization outperforms either one alone, which is why we see gains even on sophisticated platforms like Amazon DSP.The line that lands“DSPs optimize how to bid. SupplyControl improves what gets the opportunity to be bid on.”
Go deeperLesson #1 · SupplyControlWatch the Short: Balancing Efficiency & Quality in Progra…Lesson #13 · Why Sell-Side
B3Is SWYM a DSP or an SSP?
Say it to your client“Neither. SWYM is a neutral decisioning layer: it does not bid, and it does not own inventory.”
The detail
SWYM works between the buy side and the sell side. It brings advertiser intelligence to the source of supply, then delivers qualified opportunities to the DSP the client chooses.Go deeperLesson #12 · Supply Partners & ContainerizationComing soon
B4What is sell-side decisioning, and why move it upstream?
Say it to your client“It moves the first decision, which impressions are worth sending to your DSP, to the sell side, before capacity limits decide for you.”
The detail
Three pressures hurt DSP-side decisioning every year:Go deeperLesson #13 · Why Sell-SideWatch the Short: You’re Optimizing Bids on Impressions Th…
B5Which SSPs and channels does SWYM work with?Internal note
Say it to your client“11 SSPs and growing, across CTV, OLV, display, native and DOOH, with audio coming soon.”
The detail
Index Exchange, OpenX, Magnite, PubMatic, Media.net, Equativ, Nexxen, Google AdX, Xandr, InMobi and Place Exchange.SWYM connects through containers or through APIs and real-time data integrations, and uses whichever is most effective for each campaign, goal and KPI. SWYM typically uses 3-4 SSPs per campaign unless the agency or brand directs otherwise.Internal only · never paste into client emails, decks or RFPsIn any partner-facing piece, name one exchange per piece: no "cross-SSP" comparisons or exchange counts. Do not describe Equativ, Nexxen, Xandr or AdX as live container partners (see the container disclosure line). In SWYM-owned materials, "11 SSPs and growing, via containers and APIs" is safe.
Go deeperLesson #12 · Supply Partners & ContainerizationComing soon
B6What does "containerization" mean?Internal note
Say it to your client“SWYM runs its own decisioning code inside the exchange's infrastructure, in the auction path. The code comes to the data; nothing leaves the exchange.”
The detail
Internal only · never paste into client emails, decks or RFPsNever quote a container performance number (lift, delivery, match rate, CPM): none exist until the API-vs-container case studies. Do not describe how it is built (language, architecture, regions, cores, share of traffic) or any commercial terms. Exact Index figures only with "on Index's own dashboard" and partner sign-off.
Go deeperLesson #12 · Supply Partners & ContainerizationComing soonContainer disclosure line (SWY-2214)
B7How does SWYM's AI learn, and why not just use an LLM?
Say it to your client“Campaign outcomes become intelligence, intelligence shapes supply, and new outcomes make the next decision smarter, every cycle.”
The detail
Four inputs feed the loop: advertiser outcomes, bidstream intelligence, supply-path information and external results (attribution, offline sales, brand lift). The models evaluate combinations of signals, not single domain rules, and retrain continuously on live campaign data.Why specialized ML: real-time programmatic decisioning needs fast, deterministic and explainable predictions at the bid-request level. LLMs are great for unstructured data and workflows, which is where SmartOps and DeepDive use them.Go deeperLesson #6 · SWYM AIWatch the Short: Not Every Impression Is Worth a Score | …
B8How does SWYM reduce bid duplication?
Say it to your client“SWYM sees the same impression across SSPs and routes it through the one path that best serves your KPI, so your DSP stops bidding against itself.”
The detail
The result: fewer self-competing bids, lower and fairer clearing prices, and budget freed up for a broader, more diverse set of impressions. It also reduces QPS waste and gives DSP algorithms a cleaner learning environment.Go deeperLesson #1 · SupplyControlWatch the Short: Balancing Efficiency & Quality in Progra…Lesson #7 · CTV
B9Which signals does SWYM use, and whose?
Say it to your client“Your outcomes plus supply-side signals, and for brand safety, fraud and attention, typically the signal from the vendor you already trust.”
The detail
Signal
How SWYM activates it
Campaign outcomes
Scored by the SupplyControl AI engine
Supply path and auction
Cross-SSP deduplication and path selection
Geo
Set natively at the source by SWYM
Context, publisher, page quality
SupplyControl scoring and pre-bid MFA filtering
Brand safety, fraud, attention
Your approved vendor's pre-bid signal, applied in SupplyControl
Audiences
Sell-Side Audience Activation
Price
DemandControl™ · SmartBid
Go deeperLesson #13 · Why Sell-SideWatch the Short: You’re Optimizing Bids on Impressions Th…Lesson #3 · Audiences
B10Which KPIs can SWYM optimize to?
Say it to your client“Almost any KPI you can measure, from CPM and completion rates to conversions, ROAS, in-store sales and prescriptions. SWYM optimizes to your primary KPI, balances a secondary one, and respects your guardrails.”
The detail
KPI family
Examples
Conversion and cost
Conversions, conversion rate, CPA, cost per lead, ROAS
Video and CTV
VCR, CPCV, completed views, CPV, VTR
Engagement and efficiency
CTR, CPC, CPM, viewability, viewable CPM
Commerce and retail
Retail media ROAS, detail page view rate, add-to-cart, sales
Offline and real-world
In-store visits, in-store sales, sales lift, lead quality
Pharma and health
Audience quality (for example, Crossix), new prescriptions, cost per new Rx
Brand
Brand lift, awareness and consideration studies
Go deeperLesson #1 · SupplyControlWatch the Short: Balancing Efficiency & Quality in Progra…Lesson #6 · SWYM AILesson #10 · Measurement
B11We already run SPO. Why do we need SWYM?
Say it to your client“Keep your SPO. SPO chooses the routes; SWYM decides which impressions travel through them.”
The detail
A preferred exchange does not make every impression valuable. SWYM suppresses low-value opportunities even inside good sources, seeks more of what performs, and updates continuously instead of in periodic path reviews.Layer
Central question
Traditional SPO
Which exchanges, sellers and routes should we trust?
SWYM SupplyControl
Which eligible impressions are worth presenting, and by which path?
DSP algorithm
Should we bid, and at what price?
Go deeperLesson #5 · SPOWatch the Short: Supply Shaping vs SPO – Not the SameLesson #7 · CTV
What each product does, and when to bring it up. Lead with SupplyControl; introduce the next layer when the client's goal calls for it.
8 questions
C1Which product should I bring up for which client goal?
Say it to your client“Every engagement starts with SupplyControl. Add the next layer when your goals call for it.”
The detail
If the client wants...
Bring up
Lesson
Less waste and better open web results
SupplyControl™ for Open Web
#1
Better CTV efficiency and completion
SupplyControl™ for CTV
#7
The right price for each impression
DemandControl™ · SmartBid
#2
More of their own audience
Sell-Side Audience Activation
#3
Better YouTube outcomes
Curation & Optimization for YouTube
#4
Safer, higher-quality supply
SupplyControl™ with SWYM pH™
#8
Cleaner, automated operations
SmartOps™
#9
One view of every result
SWYM DeepDive™
#11
Go deeperThe PlatformWatch the Short: What is Supply Shaping? Moving Decisions…
C2What are DemandControl and SmartBid?Internal note
Say it to your client“DemandControl™ is SWYM's bidding layer and SmartBid is its AI engine: it sets the right bid inside your existing DSP. SupplyControl improves what you bid on; DemandControl improves how you bid on it.”
The detail
Internal only · never paste into client emails, decks or RFPsSmartBid needs API edit access to the client's DSP seat, so it is usually a second-phase add, not part of the first SupplyControl test.
Go deeperLesson #2 · DemandControlWatch the Short: Multi-Dimensional Bidding Beats Base Bid…
C3What is Sell-Side Audience Activation?Internal note
Say it to your client“Your audiences are matched on the sell side, before the bid, so what reaches your DSP is pre-qualified instead of a throttled random sample.”
The detail
Internal only · never paste into client emails, decks or RFPs"Perimeter" is retired. Describe audience extension generically as part of Sell-Side Audience Activation.
Go deeperLesson #3 · AudiencesWatch the Short: The Signal Is the Segment: Real-Time Tar…
C4What does SWYM do on YouTube?Internal note
Say it to your client“Curation & Optimization for YouTube decides which channels and videos your ads should be eligible for, then improves what runs next. Curation is live today; automated optimization is coming in 2027.”
The detail
Curation builds a campaign-specific set of suitable channels and videos from channel, video and contextual signals and applies it in Google Ads or DV360. Until automated optimization launches, our team reviews results after each flight and updates the channel list and suitability settings.It works alongside YouTube's own buying and auction, so the client does not change how they buy YouTube.Internal only · never paste into client emails, decks or RFPsNever say SWYM covers "all" of YouTube: it scores a growing share. Avoid "adjacency": SWYM judges channels before the buy and never sees what an ad actually ran next to (that reads as ad verification, which Google does not allow with YouTube API data). Use the full name "Curation & Optimization for YouTube".
Go deeperLesson #4 · YouTubeWatch the Short: Curation Doesn’t Equal Optimization
C5What is SWYM pH?Internal note
Say it to your client“SWYM pH™ (Page Health) gives every page a 0-100 health score from 90+ signals, so SWYM's models avoid the wrong pages and find more of the healthy ones that drive your KPIs.”
The detail
Level
What it does
pH Intelligence · always on
Learns which page traits drive KPIs and finds more pages like them
pH Filtering · optional
Removes profiles the client chooses, such as MFA or heavy ad clutter
Internal only · never paste into client emails, decks or RFPsSWYM pH has a planned availability of Q4 2026. Do not sell it as live. Today, SupplyControl already filters fraud, MFA and unsuitable inventory pre-bid.
Go deeperLesson #8 · SWYM pHWatch the Short: Brand Safety in Programmatic: Why Supply…
C6What is SmartOps?
Say it to your client“SmartOps™ is SWYM's automation layer. We don't set up your campaigns; we make sure the ones you set up stay healthy.”
The detail
Go deeperLesson #9 · SmartOpsWatch the Short: Operational Cleanup vs. Performance Cont…
C7What is DeepDive, and who gets it?Internal note
Say it to your client“SWYM DeepDive™ is SWYM's integrated reporting: every data feed in one governed model, so your team, your clients and your AI agents all read the same numbers.”
The detail
Pivot tables on the fly, download and export of all data, scheduled email reports, and previous-period and SWYM vs. non-SWYM comparisons. Ask questions in plain English and see the query behind every chart. DeepDive is MCP-native, so AI agents can query it directly.DeepDive is available to SupplyControl clients and is not tied to DemandControl.Internal only · never paste into client emails, decks or RFPsData-feed ingestion and notification or alert screens are part of the broader SWYM platform, not DeepDive. Architecture framing: SWYM AI is an input, DeepDive an output; the client's DSP and SPO are inputs SWYM works alongside.
Go deeperLesson #11 · DeepDiveWatch the Short: Clustering in Programmatic – Find the Pa…
C8Can a client or curator run SWYM themselves?Internal note
Say it to your client“Yes, that is what SWYM Central is for: self-service supply control across SWYM's integrated SSPs, powered by the same models.”
The detail
SWYM Central (formerly SelfCurate) lets agencies, curators and data companies set up, track and manage their own supply deals against KPIs. It fits teams that want control and have the operational muscle to use it. Many clients start managed, prove the value, then take on more control themselves, or run a mix of both.Internal only · never paste into client emails, decks or RFPsConfirm current availability and pilot terms with Product before committing any dates.
Go deeperLesson #13 · Why Sell-SideWatch the Short: You’re Optimizing Bids on Impressions Th…
Cost, and how SWYM gets paid. The headline is simple; keep the detail for when a buyer or procurement team asks for it.
6 questions
D1What does SWYM cost the advertiser or agency?
Say it to your client“There is no direct cost to the brand or agency. SWYM is paid on the sell side, with no markup on your CPMs and no change to how your DSP bids.”
The detail
No added budget line, no platform fee, no curation margin on top of the media price. The auction clears normally, and SWYM only earns when supply works harder for the client's KPIs.This applies to SupplyControl™ on the open web and CTV. Pricing for DemandControl™, Curation & Optimization for YouTube and other solutions is available on request.Go deeperLesson #16 · How SWYM Gets PaidInternal
D2How exactly does the sell-side fee work?Internal note
Say it to your client“SWYM's technology fee is applied within the SSP as a net bid adjustment prior to the auction, not as a post-auction markup on the CPM.”
The detail
Internal only · never paste into client emails, decks or RFPsThe "How SWYM Gets Paid" explainer is internal only and stays out of the public Lessons. Never share fee percentages, the $1.00 illustration, what SWYM pays partners for compute, or any cost advantage vs. DSP-side execution. If pushed: "fees vary by SSP integration, delivery model and scale, within existing sell-side economics," and invite them to ask our SSP partners.
Go deeperLesson #16 · How SWYM Gets PaidInternal
D3Does SWYM reduce working media?
Say it to your client“No. The fee sits downstream on the sell side, so the percentage and dollars of working media that bid on impressions are unchanged.”
The detail
The all-in "ad tech tax" is often lower with SWYM, because we remove extra hops, intermediaries and indirect paths. If publisher yield did not hold up, publishers would not activate through us.Go deeperLesson #16 · How SWYM Gets PaidInternalWatch the Short: You’re Optimizing Bids on Impressions Th…Lesson #13 · Why Sell-Side
D4Why would an SSP pay for SWYM?Internal note
Say it to your client“Because SWYM brings them more of the right demand. It is a partnership, not a toll.”
The detail
Internal only · never paste into client emails, decks or RFPsAlways use partner-friendly language: SSPs are partners. Avoid adversarial framing of SSPs in public or client conversations.
Go deeperLesson #16 · How SWYM Gets PaidInternalLesson #12 · Supply Partners & ContainerizationComing soon
D5Will our CPMs go up?
Say it to your client“Usually they go down: across SWYM's platform, CPMs average 19% lower. But we optimize to your KPI, not to CPM alone.”
The detail
For efficiency and awareness KPIs, CPM gains are often larger. For CPA or ROAS goals, CPM can rise because the aim is more conversions, not cheaper impressions. Judge on all-in cost per outcome.Go deeperLesson #1 · SupplyControlWatch the Short: Balancing Efficiency & Quality in Progra…Lesson #13 · Why Sell-Side
D6Are there any data fees?
Say it to your client“Only where a third party charges them, and they are disclosed up front.”
The detail
Go deeperLesson #3 · AudiencesWatch the Short: The Signal Is the Segment: Real-Time Tar…
Setup, measurement and timing. Most failed pilots fail on setup, not supply: agree the KPI, the method and the timing before launch.
7 questions
E1What does a recommended test setup look like?
Say it to your client“One campaign, one primary KPI, the right measurement method and enough time in market.”
The detail
Efficiency KPIs
Conversion KPIs
Example KPIs
CPM, CTR, CPC, VCR, CPCV
CPA, ROAS, conversion rate
Primary method
SWYM vs. non-SWYM, two matched cells
Pre vs. post, whole campaign
Spend to SWYM
Ideally 50%; at least 30%
50%+ of the campaign
Minimum spend
$500+ per day to SWYM
$500+ per day to SWYM
Time in market
4+ weeks
3+ attribution cycles (min. 4 weeks), or 2 + SWYM piggyback tag
DSP report
Whole campaign, SWYM and non-SWYM
Whole campaign, SWYM and non-SWYM
Go deeperGetting StartedWatch the Short: Your DSP Isn’t Broken. Your Supply Is.Lesson #10 · Measurement
E2What do we need from the client to get started?
Say it to your client“Campaign basics, one primary KPI with guardrails, and regular DSP reporting for the whole campaign. That is it.”
The detail
Go deeperGetting StartedWatch the Short: Your DSP Isn’t Broken. Your Supply Is.
E3How is SWYM activated in the DSP?
Say it to your client“The client accepts SWYM curated deal IDs in their DSP, just like a PMP. No new DSP, no new integration.”
The detail
Typically one deal per campaign per SSP. Two setups:Go deeperGetting StartedWatch the Short: Your DSP Isn’t Broken. Your Supply Is.Lesson #10 · Measurement
E4How should we measure SWYM?
Say it to your client“Efficiency metrics: compare SWYM vs. non-SWYM. Conversion metrics: read the whole campaign, pre vs. post.”
The detail
Efficiency metrics are recorded on each impression, so the DSP isolates them cleanly by line item. Conversion pixels sit on the campaign, and the DSP spreads credit across line items with its own logic (often last touch), so line-item CPA reflects crediting, not which supply drove the result. For conversion KPIs, SWYM vs. non-SWYM is directional, not definitive.Keep it fair: same KPI definition, same attribution window, stable budget and targeting, and account for seasonality and promotions.Go deeperLesson #15 · Measuring SWYM ImpactComing soonWatch the Short: Why Your CPM Went Up But ROI Didn’tLesson #10 · Measurement
E5Why does SWYM need non-SWYM and full-campaign data?
Say it to your client“Because DSP attribution credits conversions at the campaign level, so we can only prove incremental impact by seeing the whole campaign.”
The detail
Full visibility lets SWYM tell whether improvements are truly incremental, compare SWYM supply with the rest of the campaign, find remaining duplication, and see how the DSP reallocates budget. Historical data alone is not a substitute: supply, bidding behavior and auction density change constantly.Go deeperLesson #15 · Measuring SWYM ImpactComing soonWatch the Short: Why Your CPM Went Up But ROI Didn’tLesson #10 · Measurement
E6The client only wants a 30-day test. Is that enough?
Say it to your client“For efficiency KPIs, four weeks works. For conversion KPIs, 30 days usually ends before SWYM has optimized on a single full cycle.”
The detail
One cycle equals the lookback window: cycle 1 learns, cycle 2 optimizes, cycle 3 proves. With a 30-day window the first cycle matures the day the test ends. Offer 2 cycles plus the SWYM piggyback tag (it sits inside their conversion tag, such as a Floodlight) as the shorter option.Watch the incumbent head start: pre-test spend keeps converting inside the test and counts as non-SWYM. Exclude that carryover, or start the comparison after the last pre-test window closes.Go deeperLesson #15 · Measuring SWYM ImpactComing soon
E7What happens during the learning period, and what does the client see?
Say it to your client“SupplyControl adapts supply to early results while we monitor delivery and quality; the client gets a readout in DeepDive once enough weeks or cycles have passed.”
The detail
Without historical data, expect roughly the first 10-14 days to be learning. Ask the client to avoid major setup changes during that time. The first readout lands after about four weeks, or three attribution cycles for conversion KPIs, with recommendations to scale, refine or add the next layer.Go deeperGetting StartedWatch the Short: Your DSP Isn’t Broken. Your Supply Is.Lesson #11 · DeepDive
How SWYM compares. Never knock the alternative: position SWYM as the layer that makes what they already use work harder.
6 questions
F1Quick comebacks to the objections I hear most
Say it to your client“Keep it. SPO picks the routes; SWYM picks which impressions travel them.”
The detail
If you hear...
Respond with...
"We already have SPO."
Keep it. SPO picks the routes; SWYM picks which impressions travel them.
"Our DSP's algorithm handles this."
It handles bidding. SWYM improves what the algorithm gets to bid on.
"We have no budget for another tool."
There is no direct cost: SWYM is paid on the sell side, with no markup on CPMs.
"Sounds like another middleman."
SWYM usually removes hops: one curated path instead of ~1.7, and 3-4 SSPs instead of 10-40+.
"We can't share full-campaign data."
Then we can't prove incrementality. Aggregate DSP reports are enough; we don't need log-level data.
"We can only test for 30 days."
Fine for efficiency KPIs. For conversions, offer 2 cycles plus the SWYM piggyback tag.
"Will this change how we buy?"
No. Same DSP, same seats, standard PMP deal IDs.
Go deeperLesson #13 · Why Sell-SideWatch the Short: You’re Optimizing Bids on Impressions Th…Lesson #5 · SPO
F2Our DSP already optimizes. What is different?
Say it to your client“Different layer. Your DSP decides how to bid on what it receives; SWYM decides what is worth sending to it in the first place.”
The detail
DSPs are excellent bidding, pacing and auction engines, but they only see the requests they have capacity for, and a single bid request shows a single path. SWYM evaluates supply quality, outcomes, path efficiency and duplication across SSPs before the auction opportunity reaches buying logic.Go deeperLesson #13 · Why Sell-SideWatch the Short: You’re Optimizing Bids on Impressions Th…
F3How is SWYM different from custom-bidding tools?
Say it to your client“Custom-bidding providers (for example, Scibids or Chalice) optimize price inside the DSP. SWYM shapes supply before the bid. They work well together.”
The detail
Buy-side algorithms decide what to pay for each impression; SupplyControl increases the share of bidding opportunities that can deliver the KPI. Buy-side tools typically carry a direct cost, while SupplyControl does not. Clients who want SWYM on both sides can add SmartBid.Go deeperLesson #2 · DemandControlWatch the Short: Multi-Dimensional Bidding Beats Base Bid…Lesson #6 · SWYM AI
F4We already build deals in our SSPs' self-serve curation tools.
Say it to your client“Great starting point. SWYM goes further: dynamic, outcome-driven decisioning across every SSP, set once and applied everywhere.”
The detail
Go deeperLesson #12 · Supply Partners & ContainerizationComing soonWatch the Short: You’re Optimizing Bids on Impressions Th…Lesson #13 · Why Sell-Side
F5How is SWYM different from curated marketplaces and other curators?Internal note
Say it to your client“Curation used to mean packaging. SWYM is decisioning: it learns from your outcomes and keeps changing what qualifies.”
The detail
Traditional curated PMPs draw a static boundary around inventory, often repackaged open web supply with a markup on the media. SWYM is KPI-tied, learns from both buy-side and sell-side signals, is highly automated so it scales without extra ad ops headcount, and adds no buy-side markup.Internal only · never paste into client emails, decks or RFPsSpeak to approaches, not named companies, in client-facing writing. In conversation, stay factual and generous: many curators could also become SWYM Central users.
Go deeperLesson #12 · Supply Partners & ContainerizationComing soonWatch the Short: You’re Optimizing Bids on Impressions Th…Lesson #13 · Why Sell-Side
F6Is SWYM another walled garden or a lock-in?
Say it to your client“No. SWYM is open by design: it runs on an IAB Tech Lab standard, works with any major DSP and multiple SSPs, and your strategies move with you.”
The detail
Containers are an infrastructure model, not a control model. Measurement is transparent in DeepDive, and deals stay standard PMPs in the client's own seats.Go deeperLesson #12 · Supply Partners & ContainerizationComing soon
Brand safety, privacy and retention. Procurement, legal and brand safety teams ask these: answer plainly and offer the written policy.
6 questions
G1How does SWYM improve brand safety?
Say it to your client“SupplyControl filters fraud, made-for-advertising and unsuitable inventory before the bid, shifting brand safety from a post-bid check to a preventative control.”
The detail
Concentrating spend also lowers risk: across SWYM's platform, campaigns run on 64% fewer domains and 92% fewer exchanges. SWYM complements, rather than replaces, the client's verification partners, and SWYM pH™ adds page-level health scoring (planned availability Q4 2026).SWYM is not a brand safety company, but it adds extra layers of protection before the bid.Go deeperLesson #8 · SWYM pHWatch the Short: Brand Safety in Programmatic: Why Supply…Lesson #1 · SupplyControl
G2Do you work with our verification vendor (DV, IAS)?Internal note
Say it to your client“Yes. For brand safety, fraud and attention, SWYM typically applies your approved vendor's pre-bid signal, so your standards follow every path.”
The detail
The client's verification partners stay the independent measure of brand safety, fraud and viewability. SupplyControl applies their pre-bid signals consistently across every SSP and path, as long as the client and SWYM have permission to use the data.Internal only · never paste into client emails, decks or RFPsDoubleVerify data stays isolated from SWYM's own products. Never suggest partner data (DV, other exchanges' logs) is used in or exported from a container. Check the SWYM/DV "What We Can & Cannot Do" reference before describing the integration.
Go deeperLesson #13 · Why Sell-SideWatch the Short: You’re Optimizing Bids on Impressions Th…Lesson #8 · SWYM pH
G3What data does SWYM use? Any PII?
Say it to your client“SWYM uses authorized campaign delivery and performance data. It does not capture or store PII, and your data never trains shared models.”
The detail
Typical inputs are domains, app names, exchange, device type, media type and KPI results from DSP reports. Customer outcome data improves supply shaping for that client; PII is not a core model input and is not used for generative AI or cross-client training. Audience files are used only for that client's campaigns.Go deeperLesson #3 · AudiencesWatch the Short: The Signal Is the Segment: Real-Time Tar…Lesson #6 · SWYM AI
G4Is our data used for anyone else?
Say it to your client“No. Your data is your data. It is kept siloed, and only your data is used to learn and optimize for your campaigns.”
The detail
Go deeperLesson #3 · AudiencesWatch the Short: The Signal Is the Segment: Real-Time Tar…Lesson #13 · Why Sell-Side
G5What is SWYM's data retention policy?
Say it to your client“Client data is deleted on a rolling basis, with a maximum retention of 12 months, and sooner on request.”
The detail
Go deeperSWYM Data Retention Policy
G6How is data protected in transit and in the auction?
Say it to your client“Data moves over secure APIs or encrypted file transfers, and inside the exchange the data never leaves.”
The detail
Audience files go to a SWYM-provisioned Amazon S3 location using the client's AWS IAM identity. In the auction path, containers keep no state, log no user identifiers, make no outbound calls, and return nothing on requests carrying a privacy signal (COPPA, GPC, GDPR without consent).Go deeperLesson #3 · AudiencesWatch the Short: The Signal Is the Segment: Real-Time Tar…Lesson #12 · Supply Partners & ContainerizationComing soon
Numbers to use, case studies to reach for, and words to avoid. Use one standard set of numbers and cite them the same way every time.
4 questions
H1Which numbers can I use, and how do I cite them?
The key line“Across SWYM's platform, clients see a 22% KPI boost, 19% lower CPMs, 92% fewer exchanges and 64% fewer domains.”
The detail
+22%KPI boostCPA, ROAS, VCR and CPCV
−19%Lower CPMsWaste and duplicate auctions removed
−92%ExchangesSpend concentrated on top performers
−64%DomainsLess risk and complexity
Averages across SWYM's platform, display, video and CTV. Based on historical SWYM client aggregated and anonymized results and benchmarks.
Claim
Use
How to cite it
+22% / −19% / −92% / −64%
Default headline set for decks, emails, RFPs
"Across SWYM's platform"; never tie to containers or one exchange
16-25%+ / 9-17%+ / 25-42%+
The gains-stack story (Supply, Demand, full stack)
"Estimated impact, based on historical SWYM client results"
16-25% KPI, 14-44% CPM, up to 97% fewer SSPs
Ranges, when a buyer wants spread not averages
"Ranges across SWYM clients and campaigns; results vary"
50+ agencies, 200+ brands
Scale and credibility
As written; check before each quarter
~25-40% of supply visible to DSPs
The problem framing
"Industry estimates; SWYM analysis"
Go deeperAll case studies
H2Which case studies should I reach for?
The key line“Butler/Till with Index Exchange saw a 56% higher conversion rate and 26% lower cost per conversion, on 90% fewer SSPs.”
The detail
Client and channel
Headline result
Supply simplification
Butler/Till with Index Exchange
+56% conversion rate, −26% cost per conversion
−90% SSPs, −52% domains
Pharma DTC, COPD (display, 3 months)
+27% Crossix audience quality, −18% cost per new Rx
−86% SSPs, −62% domains
Higher education, CTV (CPCV)
−23% cost per completion, −17% CPM; completion 96.1% to 97.8%
SSPs 11 to 1, −84% domains
Georgia-Pacific (multi-brand CPG)
CPMs reduced by up to 44%
Spend across 30+ SSPs rationalized
Podean (commerce media)
+53% ROAS (The Drum award winner)
n/a
Historical, campaign-specific results. Not a guarantee of future results; outcomes vary by KPI, channel and SSP partner.
Go deeperButler/Till, SWYM & Index Exchange Increased C…SWYM and Its Agency Partner Reduced CPCV Acros…Georgia-Pacific & SWYM Reduced CPMs by Up to 4…Podean & SWYM Eliminated "Silent Waste" and In…All case studies
H3Which words should I use, and which should I avoid?
The key line“Say "decisioning", not "just curation": curation is static; SWYM learns and adapts.”
The detail
Say
Instead of
Why
SupplyControl™
SmartCurate, SCaLE
Retired product names
Decisioning
"Just curation" or packaging
Curation is static; SWYM learns and adapts
SSP partners
Adversarial SSP language
SSPs fund and enable SWYM
No direct cost; sell-side funded
Fee percentages or the $1.00 example
Fee mechanics are internal only
A growing share of YouTube
"All of YouTube"
SWYM scores a growing share, not all
Judges channels before the buy
"Adjacency"
Reads as ad verification, which Google does not allow
Curation & Optimization for YouTube
"YouTube Curation & Optimization"
Official product name
Sell-Side Audience Activation, audience extension
"Perimeter"
Name dropped Nov 2026
SWYM pH™, planned availability Q4 2026
pH as live today
Not yet available
™ on product names
®
Use ® only after federal registration
Hyphens and colons
Em dashes
SWYM house style
H4What do I check before sending anything to a partner?Internal note
The key line“Every number in words or with its qualifier, nothing from the "do not say" list, and one exchange named.”
The detail
Before any partner piece (Index, Media.net, OpenX, PubMatic), check it against the container disclosure line. Kevin reviews technical paragraphs; Andrew reviews the rest.Internal only · never paste into client emails, decks or RFPsNo container performance numbers until the API-vs-container case studies are published. No build details (language, architecture, regions, cores, traffic share) and no commercial terms. The "How SWYM Gets Paid" lesson stays in the internal-only folder.
Go deeperContainer disclosure line (SWY-2214)
Home / Shorts
Quick takes, straight facts, and sharp insights into what's really happening in programmatic. All 59 #SWYMshorts, made for mobile and ready to share.
Home / Case studies
Real results from brands using SWYM to reduce CPA, improve efficiency, and scale performance across programmatic channels.
Featured
Home / Glossary
Programmatic terms in plain English. Click a term for a quick illustrated explainer, and see the lessons where it comes up.
Audience extensionReaching more people who resemble your audience, matched on the sell side before the bid.
Comes up inSell-Side Audience Activation →
Bid floorThe lowest price a seller will accept for an impression.
Comes up inSupplyControl™ →
Bid multiplierAn adjustment that raises or lowers a bid for impressions with certain signals.
Comes up inDemandControl™ · SmartBid →
CPCVCost per completed view: media cost divided by the number of videos watched to the end.
CTVConnected TV: streaming content watched on a TV screen through an internet connection.
Comes up inSupplyControl™ for CTV →
Deal IDA code that carries agreed terms into the auction. SWYM delivers its curated supply through deal IDs in your DSP.
Comes up inGetting Started with SWYM →SupplyControl™ →
DSPDemand-side platform: the software buyers use to bid on inventory.
GuardrailsDelivery, brand and quality limits agreed before a campaign starts.
Learning periodThe time SWYM needs to learn from results before a fair readout. Avoid major setup changes during it.
MCPModel Context Protocol: a standard way to connect AI assistants to live data. SmartOps uses it to link assistants to campaign data.
Comes up inSWYM SmartOps™ →
MFAMade-for-advertising: low-quality sites built mainly to sell ads.
Comes up inSWYM pH™ →
Page Health scoreSWYM pH's 0-100 score for every page, built from 90+ signals.
Comes up inSWYM pH™ →
Pre-bid decisioningChoosing which impressions reach the DSP, and through which path, before it bids.
Sell-side decisioningMoving the first buying decision upstream to the supply side, before the DSP bids.
SPOSupply-path optimization: choosing transparent, efficient routes to inventory.
SSPSupply-side platform: the software publishers use to sell inventory. SWYM works across 11 SSPs.
VCRVideo completion rate: the share of video ads watched to the end.
Walled gardenA closed platform, like YouTube, that sells its own inventory under its own rules.
Home / Pitch kit
Approved SWYM decks you can send to clients, with what each one is for.
First meetings and intros
Curation and decisioning overview
YouTube and DV360 buyers
Proof points and case studies
Activating SWYM deal IDs
30-second SWYM pitch · 2-minute SupplyControl™ pitch · CTV opener for streaming buyers
"We already do SPO" · "Our DSP already handles quality" · "How would we measure it?"
DSP-side decisioning vs. SWYM sell-side decisioning · SPO alone vs. SPO + SWYM
We're putting together everything you need for your first weeks with SWYM. Check back soon.
Back to HomeLessons / Supply / SupplyControl™
SupplyControl combines your performance intelligence with real-time bidstream signals to decide which impressions reach your DSP, through which exchange and deal, and at what floor, before the DSP makes its own bidding decision. It works across 11 SSPs and growing, with any major DSP.
Pre-bid decisioningDeal IDSSPBid floor
Balancing Efficiency & Quality in Programmatic | Why Supply Control Beats Fixed PricingSWYM Short · Curation & Brand Safety
Your DSP Isn’t Underperforming – It’s OverexposedSWYM Short · Inventory Quality & Waste
Brand Safety in Programmatic: Why Supply Control is better than Filters & PMPsSWYM Short · Curation & Brand Safety
See all SWYM Shorts →
Lessons / Start here / Getting Started
Every engagement starts with SupplyControl. SWYM works through deal IDs in the DSP you already use, so there is nothing new to learn. Start with a clear goal, run a smart test, then learn and scale.
Deal IDDSPLearning periodGuardrails
Your DSP Isn’t Broken. Your Supply Is.SWYM Short · Inventory Quality & Waste
You’re Optimizing in the Wrong LayerSWYM Short · Performance & ROI
What is Supply Shaping? Moving Decisions UpstreamSWYM Short · Supply Path Optimization
See all SWYM Shorts →
Lessons / Start here / The Platform
Every SWYM engagement starts with SupplyControl, which decides which impressions are worth sending to your DSP. DemandControl and sell-side audiences enhance it, YouTube extends it into walled gardens, SmartOps automates it, and DeepDive shows the results, all connected by one AI learning loop.
Sell-side decisioningWalled garden
What is Supply Shaping? Moving Decisions UpstreamSWYM Short · Supply Path Optimization
Stop Building Bidders: Shape the Bidstream InsteadSWYM Short · Bid Mechanics
Inside the Programmatic Pipes | Where Media Waste Happens (and How SWYM Fixes It)SWYM Short · Inventory Quality & Waste
See all SWYM Shorts →
Lessons / Start here / Why Sell-Side
For most of programmatic's history, the DSP made every decision, but only about the requests it had capacity to process. Sell-side decisioning moves the first decision upstream: which impressions are worth sending to your DSP, through which path, with which signals attached. SWYM makes that decision across 11 SSPs using your campaign outcomes.
Sell-side decisioningSSPDSP
You’re Optimizing Bids on Impressions That Shouldn’t ExistSWYM Short · Bid Mechanics
You’re Optimizing in the Wrong LayerSWYM Short · Performance & ROI
What is Supply Shaping? Moving Decisions UpstreamSWYM Short · Supply Path Optimization
See all SWYM Shorts →
Lessons / Start here / SPO
Supply-path optimization helps you choose transparent, efficient exchanges and seller routes. But even the best path carries a mix of high- and low-value impressions. SupplyControl adds outcome-informed decisioning upstream of your DSP. SPO chooses the stores; SWYM chooses the products worth buying.
SPOSell-side decisioning
Supply Shaping vs SPO – Not the SameSWYM Short · Supply Path Optimization
Supply Path Optimization Is Not Supply Path IntelligenceSWYM Short · Supply Path Optimization
SPO Reduced Fees – So Why Is ROAS Flat?SWYM Short · Performance & ROI
See all SWYM Shorts →
Lessons / Supply / CTV
CTV inventory is often offered through several exchanges and deals at once, creating multiple routes to the same ad opportunity. SPO can simplify those routes. SupplyControl adds outcome-informed, pre-bid decisioning to decide which CTV opportunities and paths deserve your DSP's attention in the first place.
CTVSPOVCRCPCV
The Fragmentation Problem in CTV.. And How to Fix It Pre-BidSWYM Short · CTV & Streaming
RTD vs Containers: What’s the Real Difference?SWYM Short · CTV & Streaming
The Hidden Cost of Duplicate Bid RequestsSWYM Short · Bid Mechanics
See all SWYM Shorts →
Lessons / Supply / SWYM pH™
SupplyControl already filters fraud, made-for-advertising and unsuitable inventory before the bid. SWYM pH (Page Health) adds a 0-100 health score for every page, built from 90+ signals, so SWYM's models can avoid the wrong pages and learn which healthy ones drive your KPIs. Planned availability: Q4 2026.
Page Health scoreMFA
Brand Safety in Programmatic: Why Supply Control is better than Filters & PMPsSWYM Short · Curation & Brand Safety
Just Because It’s Premium Doesn’t Mean It’s Priced RightSWYM Short · Inventory Quality & Waste
Reducing Wasted Ad Spend | The Truth About Inventory Quality in ProgrammaticSWYM Short · Inventory Quality & Waste
See all SWYM Shorts →
Lessons / Supply / Audiences
SWYM combines your audience segments, campaign outcomes and real-time supply signals to decide which impressions are worth sending to your DSP. Audience matching happens on the sell side, before your DSP makes its bidding decision, and includes audience extension.
Audience extensionSell-side decisioning
The Signal Is the Segment: Real-Time Targeting That PerformsSWYM Short · Audience Data & Fraud
More Data, Less Insight | Why Stacking Audience Segments BackfiresSWYM Short · Audience Data & Fraud
Why Your Audience Segments Are Full of Bots – And How to Fix ItSWYM Short · Audience Data & Fraud
See all SWYM Shorts →
Lessons / Demand / DemandControl
DemandControl is SWYM's intelligent bidding layer, and SmartBid is the AI engine behind it. Working inside your existing DSP, SmartBid adjusts bids and bid multipliers in real time using audience, supply and contextual signals, so you pay the right price for each impression. SupplyControl shapes what reaches your DSP; SmartBid decides how much to bid on it.
Bid multiplierDSP
Multi-Dimensional Bidding Beats Base Bid GuessworkSWYM Short · Bid Mechanics
Predicting the Perfect Bid | How AI Makes Programmatic Advertising SmarterSWYM Short · AI & Data Science
Bid Density: The Invisible Killer of Programmatic EfficiencySWYM Short · Bid Mechanics
See all SWYM Shorts →
Lessons / Walled Gardens / YouTube
SWYM brings two disciplines to YouTube. Curation decides where your ads should be eligible to run. Optimization uses performance signals to improve how campaigns perform over time. Together they create a feedback loop between content selection, business goals and measured outcomes.
Walled garden
Curation Doesn’t Equal OptimizationSWYM Short · Curation & Brand Safety
Curation TheaterSWYM Short · Curation & Brand Safety
The New Programmatic: Curation Meets the BidstreamSWYM Short · Curation & Brand Safety
See all SWYM Shorts →
Lessons / Intelligence and operations / SWYM AI
SupplyControl connects your campaign outcomes with supply-side signals. Its models learn which combinations of inventory, auction conditions and supply paths go with stronger results, and use that learning to prioritize or reduce opportunities before they reach your DSP. As new results arrive, the decisions adapt.
Learning periodPre-bid decisioning
Not Every Impression Is Worth a Score | Fixing Model Overload in ProgrammaticSWYM Short · AI & Data Science
Multi-Class Classification – Smarter Signals, Smarter SpendSWYM Short · AI & Data Science
Which Machine Learning Model Should You Use in ProgrammaticSWYM Short · AI & Data Science
See all SWYM Shorts →
Lessons / Intelligence and operations / Measurement
Every SWYM result should be proven with a smart, logical comparison, not assumed. Agree on the KPI and guardrails up front, measure SWYM supply against a baseline or control, allow a real learning period, then read out what changed: performance, efficiency and supply quality.
GuardrailsLearning periodVCRCPCV
Why Your CPM Went Up But ROI Didn’tSWYM Short · Performance & ROI
Why Your CPA PlateauedSWYM Short · Performance & ROI
What Is R-Squared and Why It Matters in ProgrammaticSWYM Short · AI & Data Science
See all SWYM Shorts →
Lessons / Intelligence and operations / SmartOps™
SmartOps is SWYM's automation layer. It continuously scans live campaigns for setup errors, pacing problems and configuration drift against rules you define, and connects the AI assistants your teams already use to live campaign data. SWYM doesn't set up your campaigns; it makes sure the ones you set up stay healthy.
MCPGuardrails
Operational Cleanup vs. Performance ControlSWYM Short · Persona Debates
The Broken Feedback Loop | Why Swapping Domain Lists Isn’t OptimizationSWYM Short · Domain Targeting
The Performance Analyst vs. The Media PlannerSWYM Short · Persona Debates
See all SWYM Shorts →
Lessons / Intelligence and operations / DeepDive™
Programmatic truth is scattered across DSP logs, SSP bidstreams, ad servers, verification vendors and your own CRM. DeepDive joins every feed into one governed model, so your team, your clients and your agents all read the same numbers, and answers that used to take days arrive in seconds.
DSPSSP
Clustering in Programmatic – Find the Patterns You’re MissingSWYM Short · AI & Data Science
The Media Buyer vs. Performance AnalystSWYM Short · Persona Debates
Random Forests in Programmatic: Smarter Predictions, Less NoiseSWYM Short · AI & Data Science
See all SWYM Shorts →
Home / Case studies / 2025 ~ Q1 2026
AdExchanger Winner 2026Best AI Innovator
Georgia-Pacific manages programmatic media across a portfolio of iconic household brands, like Quilted Northern, Brawny, Dixie, and Angel Soft. In a space where scale is essential and margins are tight, media efficiency is a critical driver of growth and brand performance.
Like many large advertisers, Georgia-Pacific faced a fragmented programmatic supply chain with fragmented supply, inconsistent inventory quality, invalid traffic, and rising media costs. Specifically Georgia-Pacific dealt with:
Despite sophisticated DSP optimization, much of the opportunity to improve performance was being lost before bids were ever placed.
The challenge was to reduce waste, improve inventory quality, and simplify the supply chain – without sacrificing reach, scale, or campaign performance.
Georgia-Pacific partnered with SWYM to transform how inventory was evaluated before it entered the auction.
At its core, GP wasn’t just looking for incremental gains—it was aiming to replace outdated programmatic workflows with a smarter, more automated, and more accountable system.
Using AI-powered SupplyControl™, SWYM continuously analyzed bidstream signals to score, filter, and prioritize impressions in real time, eliminating low-quality inventory, reducing invalid traffic, and consolidating supply onto the highest-performing paths. Integrated capabilities created a continuously learning optimization process that included:
SWYM delivered sustained improvements in efficiency, quality, and operational performance across Georgia-Pacific’s portfolio.